192.168.254.254 serves as the default gateway IP address for various internet service provider routers and modems, primarily used by Globe At Home and PLDT for accessing router configuration settings.
How to login to 192.168.254.254?
Access your router’s admin panel by following these simple steps:
- Open your preferred web browser and navigate to http://192.168.254.254, then press Enter.
- A login screen will appear prompting for authentication details.
- Input the correct username and password for your router brand.
- Click “Log In” to enter the router management interface.
Default Username and Password for 192.168.254.254
| Brand | Username | Password |
|---|---|---|
| Globe At Home | user | admin@l03e1t3 |
| Globe At Home | admin | admin |
| PLDT | admin | 1234 |
| Frontier | admin | Check device label |
The login information is usually found on a sticker attached to the back or bottom of your modem. For additional router brands and their default passwords, consult your device manual or manufacturer’s website.
How to change WiFi password and name (SSID)?
Modify your wireless network settings using these steps:
- Access http://192.168.254.254 through your browser and log in.
- Enter your router’s default username and password to proceed.
- Navigate to the “Advanced” or “Setup” tab, then find “WiFi” or “Wireless” settings.
- Select “WiFi Security Settings” or “Wireless Security” from the menu.
- Modify the Wi-Fi name (SSID) field with your preferred network identifier.
- Choose “WPA/WPA2-PSK” or “WPA3” as your security mode for enhanced protection.
- Enter a strong Wi-Fi password in the passphrase field.
- Click “Save” or “Apply” to activate the new settings.
How to find the default IP address of the router?
Identifying your router’s correct IP address is essential for accessing its management interface. Here’s how to locate this information on different operating systems:
Windows:
- Press Windows + R keys simultaneously and type “CMD,” then hit Enter.
- In the Command Prompt window, type “ipconfig” and press Enter.
- Search for “Default Gateway” in the displayed results.
- The IP address listed next to Default Gateway is your router’s management address.
Mac:
- Navigate to Utilities and launch Terminal.
- Type “netstat -nr | grep default” and press Enter.
- The default IP address will appear next to the “default” designation.
Once you’ve identified the correct IP address, you can use it to access your router’s administrative interface and configure your network settings.
Troubleshooting Access Problems
If you’re unable to reach 192.168.254.254, consider these common solutions:
- Ensure all cables are properly connected and secure
- Confirm your modem and router are fully powered on
- Unplug devices for 30 seconds, then reconnect
- Use Ethernet cable instead of WiFi for initial setup
- Delete stored data and attempt access again
- Chrome, Firefox, or Edge might work differently
Factory Reset Instructions
When locked out or experiencing persistent issues, factory reset may be necessary:
- Locate the reset button on your router (typically small and recessed).
- While the device is powered on, press and hold the reset button.
- Maintain pressure for 15-20 seconds until status indicators change.
- Release the button and wait for the complete restart process.
- Access the device using factory default username and password.
Important: Factory reset will remove all customized settings including WiFi passwords, security configurations, and network rules. Back up important settings before proceeding with the reset process.